C-ArmsUSA LLC 
About C-ArmsUSA
In the World of preowned C-Arm systems -
C-ArmsUSA stands alone.
C-ArmsUSA stands alone.
C-ArmsUSA stands alone in value.
C-ArmsUSA leverages multiple partnerships to combine the strengths of service providers, Biomed engineers and freight companies with our own strength in refurbishment to provide our customers with quality C-Arms and the best service in the industry.
We will to provide you with:
-
Proper information for your system selection
-
Proper shielding solution to eliminate potential, costly delays
-
Quality refurbished equipment
-
Performance Tested machines for Maximum Uptime
-
Service-based Warranty that covers everything
-
Unit GUARANTEED to pass a Physicist Test
Refurbishing a C-Arm
Our refurbishment program is built around our key Performance Testing Process (PTP).
We test all processes, controls and functions for X-Ray Beam and Alignment:
Our refurbishment program is built around our key Performance Testing Process (PTP).
We test all processes, controls and functions for X-Ray Beam and Alignment:
- 5-Minute Fluoro Timer
- Emergency Off Switch
- Footswitch
- Handswitch Control
- Control Panel Controls
- Generator Accuracy
- Dose Rate
- High Level Fluoro Boost
- Fluoro Resolution in
- NORMAL
- MAG 1
- MAG 2
- Fluoro Penetration
Next we inspect all mechanical functions:
- Emergency OFF Switch
- Footswitch
- Handswitch Control
- Brakes
- Steering Wheel
- Wheels and Casters, Locks
- Static Drag Wire
We check all electrical functionality:
- Ground OHMS Continuity
- Power Cords
- Limit Switch
- Technique Display
- Control Panel Lamps
- Collimator Controls
Final steps include cosmetic and safety checks:
- Smooth all dents and scratches
- Repaint with OEM color paint
- Install new CRT inserts in monitors
- Replace Batteries (OEC only)
- Replace High Voltage Cabling
- Replace Interconnect Cabling
- Scan system hard drive for viruses
- SRAM Battery replaced
- Air Filters cleaned or replaced
- Lubricate all applicable areas
- Service the monitor fans
FINANCING A C-ARM
C-ArmsUSA LLC is proud of our track record helping facilities and private practitioners finance their C-Arm purchases.
Our affiliates can provide you with attractive packages to lease or to purchase.
What's the difference?
When you lease, the lease company is the actual buyer/owner of the equipment while you are renting it. You will have the option to buy it at lease end for $1.00. During the lease, you can deduct the lease payments as expenses of doing business.
When you finance, you are the buyer/owner of the equipment and you are entitled to depreciation and interest deductions for income tax purposes.
PLEASE NOTE: It is always advisable to consult with your accountant as to which form of purchase is best for your current financial situation.
Pain Center adds C-Arm and table for increased revenue
Our pain center has been planning to add a C-Arm for a while. Our first attempt failed miserably as the dealer chose to keep our deposit and not deliver a system. We contacted C-ArmsUSA and purchased an excellent OEC 9600 and a fixed height table. They arrived and a technician from C-ArmsUSA flew in the next day to install it and train our staff on the features of the system. San Diego, CA
C
hiropractor adding pain management to practiceI needed to find a fair-priced C-Arm, table and had a lot of questions about lead shielding, service contracts and the state or federal approval process.
C-ArmsUSA provided us with answers and solutions; we acquired an OEC 9000 and fixed height table well under our budget amount.
Chicago, IL
Pain Doctor frustrated by frequent cancellations
There are so many times that I have gotten to the hospital only to have to cancel a procedure due to the C-Arm is not available. I thought it better to just find a C-Arm that was affordable and produced good images. I bought an OEC 9000 with a fixed height table. It's perfect for my needs and was easily affordable.
Houston, TX
Our Warranty
We provide a full warranty on the C-Arm you purchase - that is, everything is covered in full - all parts, labor including the image intensifier and x-ray tube. Most others offer full coverage but they typically prorate the tube and image intensifier.
Buy a new system and you receive a one-year warranty. Buy a refurbished system from C-ArmsUSA and you get the same full coverage for six months after delivery. But the real promise of our warranty is our nationwide affiliation with "local to you" service providers. It assures you of immediate attention, next day service in the event of a system failure.
We should point out, that over the last 2-1/2 years of C-Arms delivered and installed, we have shown a 98% Uptime rate. That means, few cancellations of patients and little lost revenue for your practice. A fact not lost on those savvy practices that understand the true nature of a C-Arm is as a revenue generator for your practice or facility.
Now The Best C-Arm Money Can Buy . . .
Comes with the Best Service!
C-ArmsUSA LLC is a premier supplier of refurbished, high-quality C-Arms from OEC, Philips, Ziehm, Siemens and Hologic for use in hospitals, ASCs, pain management clinics and more throughout the USA. The quality of our equipment is unparalleled and our refurbishment program is designed to save you money in the long run.
In June 2008, C-ArmsUSA launched a campaign to bring together the shared resources of hundreds of independent service contractors throughout the USA. Our vision was to train them to perform service, upgrades and preventative maintenance on C-Arm systems for customer clients on a contract or as need basis.
MILESTONES
- August 2008 -
Service companies throughout the US assembled into database
Our goal was to locate and build relationships with service contractors familiar with C-Arm service; and/or to develop a training program for service contractors desiring to service C-Arms.
- March 2009 -
Call campaign concluded with service companies
Those service contractors familiar with C-Arms are sent a "Proposed Working Relationship" documenting our interest in working with them
- May 2009 -
First agreements signed with 'trained' NE and SW service companies
- August 2009 -
First training class held in C-ArmsUSA tech center
Some of the "not familiar with C-Arm" service providers come in for service training
- October 2009 -
First graduating class for service techs
- February 2010 -
Merged our Warranty program with a six-month, prepaid service agreement to provide best-of-class service to our customers
- June 2010 -
Added second class of service technicians requiring training on C-Arm repairs
- September 2010 -
Several service contractors removed from our group due to unethical behavior
- August 2011
We are very close to finalizing the last stage of the Vision for Quality Service with launch of an even more in-depth affiliation with a large third party service company to add other modalities to your service needs. Now, even if you didn't buy your C-Arm from C-ArmsUSA, you can enjoy the high-quality service you deserve.
- January 2012
Launch of Optimum Performance(TM) Service program in Minnesota, based in Grand Rapids, MN.
With C-ArmsUSA you save in the long run with a system you can count on: Read more
COUNT ON Maximum System Uptime - our average system uptime is 98%
CALL US TODAY 877-498-CARM [2276] - or - Complete the Service Request Form for immediate need.
MILESTONES
- August 2008 -
Service companies throughout the US assembled into database
Our goal was to locate and build relationships with service contractors familiar with C-Arm service; and/or to develop a training program for service contractors desiring to service C-Arms.
- March 2009 -
Call campaign concluded with service companies
Those service contractors familiar with C-Arms are sent a "Proposed Working Relationship" documenting our interest in working with them
- May 2009 -
First agreements signed with 'trained' NE and SW service companies
- August 2009 -
First training class held in C-ArmsUSA tech center
Some of the "not familiar with C-Arm" service providers come in for service training
- October 2009 -
First graduating class for service techs
- February 2010 -
Merged our Warranty program with a six-month, prepaid service agreement to provide best-of-class service to our customers
- June 2010 -
Added second class of service technicians requiring training on C-Arm repairs
- September 2010 -
Several service contractors removed from our group due to unethical behavior
- August 2011
We are very close to finalizing the last stage of the Vision for Quality Service with launch of an even more in-depth affiliation with a large third party service company to add other modalities to your service needs. Now, even if you didn't buy your C-Arm from C-ArmsUSA, you can enjoy the high-quality service you deserve.
- January 2012
Launch of Optimum Performance(TM) Service program in Minnesota, based in Grand Rapids, MN.
With C-ArmsUSA you save in the long run with a system you can count on: Read more
COUNT ON Maximum System Uptime - our average system uptime is 98%
CALL US TODAY 877-498-CARM [2276] - or - Complete the Service Request Form for immediate need.
. . . .
